Using a soft-bristle toothbrush is essential as the soft bristles are gentle on the implant surface and minimize the risk of scratching or causing gum irritation. When brushing your teeth, it's important to use toothbrush in small, circular motions rather than aggressive scrubbing. This Brushing Technique helps remove plaque and debris effectively without putting excessive pressure on the dental implants or surrounding tissues. Remember, gentle and consistent brushing with a soft-bristle toothbrush is key to keeping your dental implants clean and maintaining their longevity.

Using a low-abrasive toothpaste is essential for maintaining the integrity of dental implants. When cleaning your dental implants at home, choose a non-abrasive toothpaste which is specifically formulated for dental implants or low in abrasiveness and gentle on the implant surface. Some toothpaste brands contain baking soda or other abrasive substances that can scratch the implant surface. Check the toothpaste packaging and read the ingredients list. Look for toothpaste that is labeled as "non-abrasive" or "gentle." Avoid toothpaste that advertises deep cleaning or whitening properties, as they often have higher abrasiveness.

When cleaning your dental implants at home, you should pay attention to the gumline: Properly clean the area where the dental implant meets the gums. Plaque and bacteria can accumulate in this area, leading to Implant infection or Loose Implant. Angle your toothbrush slightly to reach and clean along the gumline effectively. By cleaning all surfaces of your dental implants, including the crown or prosthetic tooth, implant post, and gumline, you can effectively maintain oral hygiene and prevent complications.

Rinsing with an antimicrobial mouthwash and salt water rinses are an excellent addition to your dental implant cleaning routine. Use a mouthwash that is alcohol-free, as alcohol can cause dryness and irritation. Remember that both antimicrobial mouthwash and salt water rinses are a supplement to your regular brushing and flossing routine. It helps reduce bacteria and maintain oral hygiene, but it should not replace proper oral care practices. 

Medical Disclaimer:

In good 95% cases, even if there has been a lot of bone loss, we can use All on 4 Dental Implants. In patients with excessive bone loss, a Zygoma or cheek-bone implant can be used,’ says Dr Dhawan.

• Friends & Acquaintances: Networking always pays well. You should ask your family & friends who have gone through a dental implant. Ask them about the doctor that performed the procedure and how it went. A detailed review from a known person will give you a clear idea and a name to look into further.
• Other Dentists: It is common for people to know someone who might be in the profession and even have a dentist they regularly visit. Sometimes dentists even refer their critical patients to other professionals with better skills. So if your known dentist sends his patients to another specialist, it might be time for you to look for them.
• Insurance Provider: Health is a big issue, so it is now common for people to have health insurance. If you have an insurance provider, cross-check with them to see which dental implant specialists can your insurance cover. It might not seem a big deal, but the truth is choosing a dentist outside of your insurance plan can put a strain on your pocket. 
• Online Resources: The Internet is the best friend that everyone has. You can use the internet to search for the best dental implant specialist near me. You will get a list of many names, and you can filter them via our guide.

• CBCT Scanner- A dental implant specialist will often have a CBCT scanner as it is a crucial tool for their work. Such scanners help them to look into your mouth and have a better examination of your oral health. These scanners are highly expensive & only the best practitioners will have them. It is crucial because if you choose a dentist that does not own it, they will either refer you to a place that does it or even go forward with the procedure without the precise idea.
• 3D Printer- 3D printer is the new wave of advancement in the field of dentistry. A 3D printer allows the dentists to get your prosthetics in a couple of hours within their office space. 3D printers cost a fortune. So, if you can find a clinic that does dental implant procedures and owns one, it implies how well they are doing and how precise their techniques & methods are.
• Intra Oral Scanner- An intra oral scanner is another example of advance technology in Dentistry. The scanner comprises of a wand that sense or capture the digital data. It allows dentist to scan your oral cavity in a better way and provide more precise & detailed data. This can further help in making a 3D surface model.

• Provide convenient access to high-quality care
• Prioritise older patients over the new ones
• Have a follow up with every patient even after the treatment
• Educate you on proper dental hygiene 
• Personally remind you of your next visit or session

A personal visit to the dentist before you go forward with your implants is a must. When you visit, you not only should judge the doctor but also have a survey around his working space. Look how well the clinic is maintained. See how the staff interacts with people, are the tools in use properly sterilized, is the cleanliness code maintained or not. A doctor who cannot keep his work place clean sure is not reliable to cure the sanctity of your oral cavity. So, the environment of the workplace is what you should observe carefully.

If you are considering Dental Implant Treatment at ADC™ - Centre for Restorative and Implant Dentistry, you must be aware that the treatment is done in several stages over several weeks to attain what is called "Successful Dental Implant". Here's a brief idea about various stages of Dental Implant Treatment.

Once the initial Treatment planning is done the dentist carry out the Implant placement procedure. A precisely small conservative incision is made at the crest of the gums exposing the underlying jaw bone. Using the Implant Placement drills, a hole is drilled into the jaw bone in which the implant of required length and diameter is anchored. Once Dental Implant is anchored in the gums are carefully sutured back.

Once the Implant has been anchored into the jaw bone, the process of fusion with the bone also called as osseointegration begins. The bony tissues begin to fuse and grow within the threads of the Dental Implant to create a strong foundation. However different human beings have reported different time interval for this to happen. Generally Osseointegration is accomplished within 3 to 6 months. We may schedule several follow up visits to check for the progress of Osseointegration.

The next stage in the Dental Implant Treatment is to have Gum Former, also called as gingival abutments fitted once the Osseointegration is confirmed. It looks like a round screw head which sits on the Gum over the Implants, Allowing the Gums to mature and heal around the Implants thus preparing a foundation for good impressions and life like restoration. This stage usually take 5 to 8 days.

Before the final crown is attached to the Implant, we would always like to assess and analyze the load bearing capacity of the Dental Implants. Thus we place a small post over the Implant called Abutment, acting as the connector between the Dental Implant and the restoration.

Within 2-3 minutes of the Dental Implant Placement into the surgical site, the first stage of Dental Implant Osseointegration begins. The Blood coagulates around the Dental Implants and forms collagen fibers union between the Dental Implant surface and ruptured micro Blood Vessels. The platelets start aggregating around the cross linking collagen fibers forming a matrix and thus laying the foundation stone for bone repair process.

Hours after the Dental Implant surgery, the second stage Osseointegration ( Inflammation) begins. The defense cells or immunity cells  start cleaning up surgical site-removing debris, possible bacteria, sectioned small bony residues. At this stage the peri-vascular cells start repair and regeneration of the Micro Blood Vessels along with defense cells of the body.

Days after the Dental Implant surgery, the third stage Osseointegration ( Proliferation) begins. Peri-vascular cells regulate Angio-genesis and often lead to the formation of Osteoblast cells (Bone Forming Cells ) and Fibroblast cells (Fiber forming cells). Osteoblast cell enable the formation of new bone via release of calcium phosphates and carbonate around collagen fibers. Thus proliferation leads to new bone formation between the threads of the Dental Implants.

Months or weeks after the Dental Implant surgery the fourth stage of Osseointegration called Reconstruction begins. At this stage the Implant integrate to the bone and tissues. Osteocytes initiate the regeneration and bone remodelling phase. Ones the fourth stage, Remodelling is complete the Dental Implant has aggregated with the bony tissues and the Dentist can initiate the process of placing the teeth over the Dental Implants also called as Loading.

The result of these inquiries is the SLActive surface. SLActive takes the scientifically proven SLA® surface one step further through its improved surface chemistry. With its hydrophilic and chemically active properties, SLActive® promotes faster osseointegration and leads to earlier secondary stability than SLA. By achieving secondary stability sooner, SLActive “shifts” the stability dip.

The complexity of your specific dental condition will impact the cost of the implant procedure. Cases that require additional procedures such as bone grafting or sinus lift or Sinus augmentation may incur higher costs.

In India the geographic location of the dental practice can also influence the cost. Dental practices in metropolitan areas or regions such as Mumbai, Delhi or Bengaluru with a higher cost of living may have slightly higher prices as compared to other parts of India.